Renewable Design for Lcd Frozen Separator Machine - Max 300 Degree High Temperature Microfluidic Chip Vacuum Thermocompression Bonding Machine – Jiutu
Renewable Design for Lcd Frozen Separator Machine - Max 300 Degree High Temperature Microfluidic Chip Vacuum Thermocompression Bonding Machine – Jiutu Detail:
Max 300 Degree High Temperature Microfluidic Chip Vacuum Thermocompression Bonding Machine
Function :
Microfluidic chip vacuum thermocompression bonding machine is a good alternative product based on soft lithography micromachining technology, which is convenient for the rapid manufacture of your microfluidic devices, using temperature and pressure control, can be achieved within minutes. Hot pressing process for various materials, it has been optimized to make Flexdym polymer molding in just 2 minutes, but can also be used to mold various other thermoplastics such as acrylic
Specification :
Mainly suitable for bonding of rigid plastic chips such as PMMA, PC, PP, COP, COC, BOPET, CBC, resin (part), polyethylene (part), etc.) The maximum temperature is 200 degrees; the maximum pressure is 10KN.
Application :
Vacuum hot press is a complete set of equipment for hot pressing materials under vacuum (or adding other gases); it mainly adopts resistance heating, which is pressurized by the indenter of the cylinder, and the solid particles of the green body are bonded to each other at high temperature. Grain growth, voids (pores) and grain boundaries gradually decrease, and the total volume shrinks through material transfer, density increases, and finally becomes a dense polycrystalline combustion body with a certain microstructure, thereby pressing the material into molding. The simultaneous action of high temperature, pressure and vacuum or gas significantly increases the density, hardness and other mechatronic thermal properties of the product.
Product detail pictures:
Related Product Guide:
Mitsubishi Electric invests in Realtime Robotics’ motion-planning technology | Assembly Machine
Mitsubishi buys Iconics and invests in Realtime Robotics | 2 In 1 Glass With Bezel Frame
Our eternal pursuits are the attitude of "regard the market, regard the custom, regard the science" and the theory of "quality the basic, belief the very first and management the advanced" for Renewable Design for Lcd Frozen Separator Machine - Max 300 Degree High Temperature Microfluidic Chip Vacuum Thermocompression Bonding Machine – Jiutu, The product will supply to all over the world, such as: Cape Town , Seychelles , Greece , Each product is carefully made, it will make you satisfied. Our products in the production process have got strictly monitored, because it is only to provide you the best quality, we will feel confident. High production costs but low prices for our long-term cooperation. You can have a variety choices and the value of all types are same reliable. If you have any question, do not hesitate to ask us.
By Mavis
from Iran
- 2018.06.18 19:26
In China, we have purchased many times, this time is the most successful and most satisfactory, a sincere and realiable Chinese manufacturer!
By Elsa
from Peru
- 2017.08.15 12:36
