Vacuum bubble remover machine is mainly used for capacitive touch screen, resistive screen, liquid crystal display module bubble remover equipment and secondary compression bubble remover equipment. It is mainly used for polarized film bubble remover, OCA bubble remover, and protective film bubble remover. This kind of special equipment, equipment operators need to be trained to avoid accidents.
Preparation before use
1. Confirm that the pressure is connected to the equipment inlet.
2. Confirm that the power supply is connected to the device.
3. Whether the equipment is firmly and horizontally placed.
4. Verify that the air dehumidification exhaust port and the manual exhaust valve port are closed.
5. Whether the pressure, temperature and time are set correctly.
6. Whether to confirm the one-step command action in the manual interface before automatic use.
Matters needing attention in use
When the pressure in the fuel tank is> 0.01kgf, do not click the door button.
Vacuum bubble remover machine uses pressure and temperature to remove air bubbles in the bonding process, and at the same time enhances the adhesion between different materials, standardizing the use of vacuum bubble remover machine is beneficial to prolong the service life of the equipment.
Post time: Sep-02-2020