Factory selling Oca Front Glass - Microfluidic Chip Vacuum Hot Pressing Bonding Machine For PC PP COP Rigid to Rigid Bonding – Jiutu
Factory selling Oca Front Glass - Microfluidic Chip Vacuum Hot Pressing Bonding Machine For PC PP COP Rigid to Rigid Bonding – Jiutu Detail:
Microfluidic Chip Vacuum Hot Pressing Bonding Machine For PC PP COP Rigid to Rigid Bonding
Function :
Microfluidic chip vacuum thermocompression bonding machine is a good alternative product based on soft lithography micromachining technology, which is convenient for the rapid manufacture of your microfluidic devices, using temperature and pressure control, can be achieved within minutes. Hot pressing process for various materials, it has been optimized to make Flexdym polymer molding in just 2 minutes, but can also be used to mold various other thermoplastics such as acrylic
Specification :
Mainly suitable for bonding of rigid plastic chips such as PMMA, PC, PP, COP, COC, BOPET, CBC, resin (part), polyethylene (part), etc.) The maximum temperature is 200 degrees; the maximum pressure is 10KN.
Application :
Vacuum hot press is a complete set of equipment for hot pressing materials under vacuum (or adding other gases); it mainly adopts resistance heating, which is pressurized by the indenter of the cylinder, and the solid particles of the green body are bonded to each other at high temperature. Grain growth, voids (pores) and grain boundaries gradually decrease, and the total volume shrinks through material transfer, density increases, and finally becomes a dense polycrystalline combustion body with a certain microstructure, thereby pressing the material into molding. The simultaneous action of high temperature, pressure and vacuum or gas significantly increases the density, hardness and other mechatronic thermal properties of the product.
Product detail pictures:
Related Product Guide:
OnePlus 6T vs OnePlus 6: what difference did half a year make? | Industrial Robots
Global Assembly Equipment Market Outlook 2019 – Kent Machine, Arnold Machine, Buckeye Machine, Sandvik Materials Technology | Air Bubble Removing Machine For Lcd Repair
The client satisfaction is our primary concentrate on. We uphold a consistent level of professionalism, top quality, credibility and service for Factory selling Oca Front Glass - Microfluidic Chip Vacuum Hot Pressing Bonding Machine For PC PP COP Rigid to Rigid Bonding – Jiutu, The product will supply to all over the world, such as: Latvia , Indonesia , Serbia , We set a strict quality control system. We have return and exchange policy, and you can exchange within 7 days after receive the wigs if it is in new station and we service repairing free for our products. Please feel free to contact us for further information if you have any questions. We are glad to work for every client.
By Grace from Russia - 2017.11.20 15:58
The quality of the products is very good, especially in the details, can be seen that the company work actively to satisfy customer's interest, a nice supplier.
By Joanne from Johor - 2018.02.21 12:14